CONTENT:
This is a fully function of my project after going through a few troubleshoot. First of all, I need to connect the supply which is 9V that I use in this prototype. Then, we have to push a button start to make the vehicle move forward by follow the line. When the vehicle detect a metal on the floor, it will stop for a 10sec. This part is use for a worker at the factory to put a load on the vehicle. After 10 sec, the vehicle will move as usual by follow the line provided. Once the vehicle detect any presence of obstacle in front of it, the vehicle will stop immediately also for a 10sec and the buzzer also will ON automatically to sign a people the there have a obstacle in front of the vehicle. After 10sec, the vehicle will move again by follow the line. All this process will be run continuously until we push a stop button or disconnect the power supply. This project can be applied in factories, hospital, offices and also residential area. Diagram shown below is one of an example of the track can be implement for this vehicle.
OBJECTIVES:
- To well known about the fully operation of the Automated Guided Electric Vehicle.
- To know a suitable place that can be implement this kind of material handling.
CONCLUSION:
I can see the whole operation in this project and the fully function of doing this vehicle. So all the objective already been achieve since the vehicle can move smoothly and run well.
No comments:
Post a Comment